| |
Products Using
Using
The Bolivian magnesium board application scope is extremely widespread,
specially in construction decoration domain partition wall and suspended
ceiling material. It adapts completely separates Hot heat preservation
structure, sound-insulated wall, moist region, active partition
wall, top grade fire protection, in fire door clamping plank, equipment
box in vitro
Region and so on packing.
Depositing The Bolivian magnesium board may resist the heavy weather,
but for maintenance use time dryness, suggested the user should
better store up in the lab, the ground wants Asks smooth or the
pad plank.
Decoration
The Bolivian magnesium board pan may paste the wallpaper, is red
and white barks, brushes the coating, the paint, pastes the ceramic
tile, the mosaic and so on.
Attention
The Bolivian magnesium board pan may paste the wallpaper, the power
saw, also may use knifes the straightedge to delimit the mark to
break off. May use the nail, from the merit screw, shoots Nail gun
or drill hole after-fixing.
Decoration
The Bolivian magnesium pan may paste the wallpaper, is red and
white barks, brushes the coating, the paint, pastes the ceramic
tile. Mosaic and so on.
Attention: When pastes the ceramic tile mosaic should reinforce
a steel wire on the pan to forget, after the water used soil mortar
blows coarse glues.
The Bolivian magnesium board widely applies in the guesthouse,
the market, the restaurant, the nightclub, the bank, the hospital,
the supermarket, the office and home use Housing and so on many
kinds of interior trim partition wall, suspended ceiling, kitchen,
bathroom.
Plate: In the ordinary circumstances suggested the Bolivian
magnesium board does with the 6MM thickness above separates the
wall plate. Fitting: Above the 6MM plate fixes on the frame keel,
must use 3.520MM to sink a screw retention, the nail head is lower
than the pan 0.5MM, in order to the guarantee facing is smooth.
Installment: Starts when installs, must the sign good keel standard
position, and finishes the symbol, the center keel center distance
be 45.- 600MM, the wall attachment point and the windows and doors
two sides install when must install attaches the keel, when highly
like the wall is bigger than 2440MM, must Installs in the plate
attachment point supports the keel. Board distance: Is near between
the plate to keep the seam to be apart from 4-6MM. Between the plate
and the ground must the 5MM gap, the bolt installment center
The distance is 150MM, is apart from flange 10MM, is away from board
angle 30MM. Hangs: Between the hygienic once in a while kitchen
and so on hangs the heavy item place, must use the plank or the
keel reinforcement, in order to avoid the plate receives the destruction.
Joint processing: When installment the plate and the plate gap
4 - 6MM, mixes well after 107 glue water or the force rubber spreads
with the shaving knife Wipes the plate and the slit place, then
glues with the paper tape or the style belt presses evenly. Coating
decoration: May use to spurt spreads, or rolls spreads, when brushes
spreads must refer to the coating the related explanation. Installs
the facing to paste the ceramic tile: When the bathroom, the bathroom,
the kitchen, the basement wait for tide wet region installs, like
must paste the ceramic tile in the pan Between the keel distance
must reduce to 400MM. The strong body each three blocks (about 3.6MM
must approximately) an expansion and contraction Seam. Separates
the intensity of sound body: Like needs the strong body to have
the high sound-insulated effect, must request the strong body and
the plate union close is airtight, again approaches the spatial
wall In fills the asbestos, when like keel both sides use two kind
of different thickness the boards, the sound-insulated effect is
better. Anti- impact wall: Suggested you select above 8MM the board
or add plywood, the second board must use the long some screw bolt
reinforcement . This method may strengthen the anti- impact, the
heat insulation, the sound-insulated effect and the fire protection
performance.
|